POND GUARD is a two-part water-based epoxy membrane sealer for ponds and water features. POND GUARD is a non-toxic sealer that conforms to the Australian Drinking Standards requirements set out for AS4020.2000 and BS6920. Part A and Part B cover a total of 6 square metres using 2 coats.
POND GUARD must be applied to dry and fully cured concrete. Best results are achieved if the concrete is wet with a fine mist and just allowing the surface to dry prior to application. Apply POND GUARD using a roller or brush. Care must be taken when working the sealant into voids and avoid pinholing. Apply POND GUARD evenly and rework areas with a roller or brush to get an even finish. A MINIMUM OF 2 COATS IS REQUIRED TO ACHIEVE WATERPROOFING. Allow 4 hours of curing time between coats. Allow POND GUARD to cure for 24hrs before applying water-based adhesives, mortars, levelling compounds, decorative coatings or surface treatments. Care must be taken to make sure the POND GUARD waterproofing membrane is
not damaged during application of subsequent surface treatments.
ACCC / Consumer Law
We follow the guidelines provided by the ACCC and Australian Consumer Law that protects you as a consumer in Australia. Below are the terms for refunds and returns.
Change of Mind
Conditions for change of mind.
- Must be unopened, unused, and in saleable condition.
- Must be within 14 days of purchase.
- Return shipping costs are the responsibility of the buyer.
- A 10% restocking fee will apply to all refunds for change of mind.
If you do have a change of mind, please fill in the below form with the reason for return as "Change of Mind." Once your return has been approved and received, you will receive a store credit or gift voucher for the amount paid for the item (excluding postage and the 10% restocking fee).
Item Received Damaged
If you receive a product that is broken in transit, we must be contacted within 48 hours of you receiving your order. Please fill in the below form with the reason for return as "Damaged in Transit." We will then contact you with further instructions.
Faulty within Manufacturer Warranty
If your product becomes faulty within warranty period, please call (94148040) or email (admin@pases.com.au). You will need to provide proof of purchase and return the faulty product to us.
